Cot Bumper OCS Classic Stripes Camel vs No Bumper: A Parent's Guide
By Cam Cam Copenhagen | Official Website | Scandinavian | Published: 2026-11-02
Category: Comparisons
Weigh the Cot Bumper OCS Classic Stripes Camel against a bare cot: fit, tie-ribbon safety, and when a bumper genuinely helps versus when it adds risk.
Quick answer
Choose the Cot Bumper OCS Classic Stripes Camel only if you want a padded, striped liner for a standard 120x60 cm cot and will follow the tie-ribbon safety rules. Otherwise, a bare cot is the simpler, lower-risk default.
What the bumper actually adds to a 120x60 cot
The Cot Bumper OCS Classic Stripes Camel is a 30x365 cm padded liner made for a standard 120x60 cm cot. It wraps the inside of the cot to soften the rails and add a calm, striped look. A bare cot offers none of that padding or visual warmth, so the choice comes down to whether you value the softer perimeter enough to manage the fitting and safety rules.
The tie-ribbon rule that changes the decision
The bumper attaches with tie ribbons along the outside of the cot, and the brand instructs you to cut off any excess ribbon for safety. If the bumper is not in use, the ribbons must be cut off entirely so they are out of reach of the baby. A no-bumper cot has no ribbons to manage at all, which is why it remains the lower-maintenance option for many families.
Where the trade-off lands for different families
If you want the striped look and a softer cot perimeter, the OCS Classic Stripes Camel is a coherent choice, but only with correct fitting and trimmed ribbons. If you prefer to avoid extra attachments or frequently change bedding, a bare cot is easier to keep consistent. The catalog does not list a bumper for every cot size, so check your cot is 120x60 cm before deciding.
Trade-offs at a glance
- Padded, striped perimeter: The bumper softens the cot rails and adds the OCS Classic Stripes Camel look, but you take on fitting and ribbon management that a bare cot does not require. Choose it only if you will keep the ribbons trimmed and out of reach.
- Standard 120x60 cm fit: The 30x365 cm bumper is sized for a standard 120x60 cm cot; a bare cot has no size constraint, so non-standard cots should stay unbumped unless you confirm fit.
- Ribbon safety routine: Tie ribbons along the outside and cut off any excess; when the bumper is not in use, cut the ribbons off so they are out of reach. A no-bumper cot removes this step entirely. If you will not maintain the ribbon routine, the no-bumper option is the safer default.
Product facts
- Cot Bumper - OCS Classic Stripes Camel: Fits a standard 120x60 cm cot and measures 30x365 cm. Measure your cot first; a non-standard size will not get the intended wrap.
Cot Bumper - OCS Classic Stripes Camel - Cot Bumper - OCS Classic Stripes Camel: Attaches with tie ribbons along the outside of the cot; excess ribbons must be cut off for safety. Budget time for correct fitting and trimming, and remove or cut ribbons when the bumper is not in use.
Who should choose which
Best for
- Parents with a standard 120x60 cm cot who want a padded, striped liner and will follow the tie-ribbon safety rules.
- Shoppers who value the OCS Classic Stripes Camel look and accept the fitting and trimming routine.
Not for
- Parents who prefer a bare cot with no attachments or ribbons to manage.
- Cots that are not a standard 120x60 cm, since the supplied fit is specific to that size.
